E30 & E36 Control Arm Eyeball Offset Arms – “Treehouse”

E30 & E36 CONTROL ARM EYEBALL OFFSET ARMS – “TREEHOUSE”
Description
These E30 / E36 Eyeball Arm brackets replace the control arm bushings and the OEM bushing ‘lollipop’ mount. These mounts come powdercoated red with a press-fit UHMW insert center. This setup is a step up from just upgrading to poly or delrin replacement bushings. Their biggest advantage is its design which will hold the control arm steady under all cornering loads. Because of its new geometry, there is no room for movement/play. This means this is one of the most solid setups you can achieve on your E30 without DTM style solid mounting.
Machined out of solid billet steel, we designed these treehouse control arms to be extremely tough and reliable under racing conditions and normal street use.
The geometry of these eyeball mounts will eliminate the “shimmy” and wheel hop caused by stock bushings. These eyeball arms offer the greatest performance increases in handling and turn-in while still being 100% acceptable for street use! There will be a very slight increase in noise but is well worth the trade off in stability. If noise is a concern we also carry poly control arm bushings that get pressed into your stock lolipop mounts. They cost less then these eyeball mounts and will have less noise.
Excellent for both regular Street or full Track use. Unfortunately, not Spec-E30/E36 legal. These are very similar to the discontinued “Treehouse racing” eyeball control arm bushing mounts. As with all of Garagistic products; we offer a life-time guarantee. Price is for a pair (2 units). Enough to do 1 car.
Please note: These have the “offset” geometry found on E30 M3s and some E36 M3s. This offset found in these eyeball mounts offer a couple of slight features over the centered version.
SOME BENEFITS OF OFFSET GEOMETRY
More caster
Replaces 31129064875
Powdercoated Red
Billet Steel
Service slots for greasing and insert replacement
NEED REPLACEMENT BUSHINGS? CLICK HERE